Photo Gallery Conference ModTech 2010

Modern

Modern means to be new, to be in accordance with the contemporary stage of civilization, to correspond to the actual technical progress.

Technologies

Technologies are one of the motors of the social, economical and scientific progress.

Quality

Quality is, in the broad sense, a degree of excellence which express the extent that something is suitable for the purpose for which it was created and, in effect restricted, represents compliance with the requirements, lack of defects, or to the satisfaction of customer needs .

Innovation

Innovation has to characterize the activity developed by the engineers and scientists.

Full papers Conference ModTech 2012

Reviewers will recommend papers for publication in International Journal of Modern Manufacturing Technologies.

Full papers accepted:

Full papers waiting:

- 398 IMPROVING BUSINESS PROCESS MANAGEMENT IN MANUFACTURING – A CERTIFICATION AND QUALIFICATION MODEL
  Anca Draghici, Claudiu-Tiberiu Albulescu, George Draghici
- 397 STUDY OF WATER FLOW THROUGH A CONICAL STATOR AND RUNNER STEPS OF A HYDRAULIC TURBINE WITH GRAVITATIONAL VORTEX
  Mărian Marius Gheorghe, Sajin Tudor, Nedelcu Dragoş Iulian, Bîrsan Cătălin, Ostahie Constantin Narcis, Florescu Iulian, Pintilie Gheorghe, Grigore Roxana
- 396 QUALITATIVE ANALYSIS OF ABRASIVE GRAIN WEAR BY ULTRASONIC AIDED PLANE LAPPING
  Liliana Georgeta Tulcan
- 395 3D PARAMETRIC MODELING OF INVOLUTE GEARS IN PRO ENGINEER WILDFIRE 4
  Nicolae Pop , Margareta Coteata
- 393 COORDINATE MEASURING MACHINE UNCERTAINTY FOR DIFFERENT PROBE HEAD CONFIGURATIONS
  Aurel Tulcan1, Cristian Cioană1, Daniel Stan1 & Ion Grozav1
- 389 TECHNICAL COMPETENCIES TRAINING NEEDS IDENTIFICATION FOR NURSING - A PILOT RESEARCH
  Ioana HARPAN, Anca DRAGHICI
- 382 APPLICATION OF MECHANICAL AND ELECTRIC ELEMENTS AS IMPLEMENTATION OF ACTIVE REDUCTION OF VIBRATION
  Katarzyna Białas
- 381 CONTRIBUTIONS TO THE QUALITY STUDY OF THE PARTS MADE OF MALLEABLE IRON, 52-54 HRC, USED FOR MANUFACTURING CRANKSHAFTS
  Ilarion Banu; Ion Dobrescu
- 378 RESEARCH ON THE INFLUENCE LUBRICANT FRICTION AND ROUGHNESS HOLLOW PARTS REVERSE EXTRUSION
  Lucian Butnar, Horia Cioban
- 376 RESEARCH ON INCREASE POWER LITER SPARK IGNITION ENGINES BY ISOLATING COMBUSTION CHAMBER
  Ioan Radu Şugar 1, Lucian Adrian Butnar1 ,
- 374 EXPERIMENTAL RESEARCH ON THE INCREMENTAL SHEET METAL FORMING USING A CNC LATHE
  Ion Neagoe, Alexandru Filip, Mircea Vasiloni
- 371 Study on the resonant frequency gliding in the ultrasonic systems loaded with variable axial compression force
  Daniel Stan, Iancu Şerban, Alin Sîrbu
- 369 CONTINUOUS IMPROVEMENT OF PRODUCTION PROCESS USING PROCESS FAILURE MODE AND EFFECTS ANALYSIS
  Nadia Belu, Nicoleta Rachieru, Emil Militaru , Daniel - Constantin Anghel
- 368 FAILURE MODE AND EFFECTS ANALYSIS: A USEFUL TOOL FOR RISK IDENTIFICATION AND INJURY PREVENTION IN PRODUCT DEVELOPMENT
  Nadia Belu, Emil Militaru , Nicoleta Rachieru , Daniel-Constantin Anghel
- 365 DEVELOPMENT OF A METHODOLOGY FOR INVESTIGATION OF THE DEGREE OF THE ACADEMICAL INFORMATIONAL SATISFACTION
  Bogdan Budeanu, Ionut Viorel Herghiligiu, Luminiţa Mihaela Lupu
- 362 DEVELOPMENT OF AUXETIC WEFT KNITTED FABRICS
  Buhai Crina, Blaga Mirela, Ciobanu Ramona, Budulan Costea
- 359 PLATFORMS FOR INTEGRATED PRODUCT DESIGN, MANUFACTURING AND CONCEPTION PROCESS
  Cosmina Carmen Aldea, Stelian Cornel Florica & George Draghici
- 357 SOME CONSIDERATIONS ABOUT TRUST IN VIRTUAL TEAMS THROUGHT THE ICT TOOLS USED
  Cosmina Carmen Aldea & Anca Draghici
- 354 PARAMETRIC DESIGN OF SPUR GEAR
  STANASEL IULIAN, BLAGA FLORIN
- 353 ASPECTS CONCERNING THE DECISIONAL PROCESS IN INDUSTRIAN BUSINESS INSURANCE
  Florin-Catalin Olteanu, Gavrila Calefariu, Adriana Fota, Nicolae Barsan Pipu
- 351 DEVELOPMENT OF ADVANDED COMPOSITE MATERIALS AND NOVEL MATERIAL RECYCLING BY PARTICLE BONDING TECHNOLOGY
  Makio Naito, Hiroya Abe & Akira Kondo
- 350 THE PLATFORM FOR RISK ASSESSMENT IN THE SYSTEM ENTERPRISE
  Monica Izvercianu, Larisa Ivascu
- 349 AN APPROACH FOR THE ENTERPRISE 2.0 IN SUSTAINABLE BUSINESS
  Monica Izvercianu, Larisa Ivascu
- 348 METHODS AND TECHNIQUES OF ANALYSIS AND MANAGEMENT OF FLEXIBLE PRODUCTION SYSTEMS
  Adriana Fota, Gavrila Calefariu, Sorin Barabas, Nadia Stoian, Florin-Catalin Olteanu
- 344 INFLUENCE OF DIFFUSION ANNEALING IN DEEP CARBURIZING PROCESS ON HARDNESS OF CARBURIZED LAYER USED TO SHAFTS HEAT TREATMENT
  Sorin Barabaș, Gheorghe Oancea, Adriana Fota, Alexandru Manolescu
- 341 CONTRIBUTIONS CONCERNING THE THEORETICAL ERROR DETERMINATION AT MANUFACTURING OF HELICAL SURFACE USING WHIRL THREADING
  Gheorghe Cretu, Dumitru Nedelcu
- 338 OFFLINE PROGRAMMING ROBOTS IN ROBOTSTUDIO FOR PLASTIC WELDING
  Viorel Cohal
- 336 INCREASING HUMAN RESOURCES COMPETITIVENESS THROUGH LEARNING MANAGEMENT SYSTEMS
  Monica Izvercianu, Alina Radu
- 335 ON THE 3D CAD/CAE LOCAL MODELS FOR FATIGUE ASSESMENT OF AN OPTIMIZED CONTAINER SHIP STRUCTURE
  Ionica Rubanenco, Iulia Mirciu, Leonard Domnisoru
- 334 PARAMETRIC PART IN PROENGINEER OBTAINED FROM A SCANNED MODEL
  Alexandru Manolescu, Adriana Fota, Gheorghe Oancea, Roxana Folosea
- 333 MECHANICAL PROPERTIES OF MULTI-LAYER KNITTED FABRICS MADE FROM MICROFIBER
  Buhai Crina, Ciobanu Ramona, Sarghie Bogdan, Costea Budulan
- 330 EXPERIMENTAL PULSE GENERATOR TO STUDY THE INFLUENCE OF DIVIDED PULSES ON THE BREAKDOWN OF DYELECTRIC LIQUIDE IN EDM
  Constantin DIACONESCU, Dan NANU
- 329 A CONTENT ANALYSIS OF VIRTUAL ENGINEERING COLLABORATION TOOLS
  Monica Izvercian, Sabina Alina Şeran
- 327 STUDY OF THE SPEED FOR THE DATA TRANSFER IN THE DOPED PERMALLOY INCLUDED IN THE GRID RACETRACK MEMORIES
  Daniela Ionescu, Maria Kovaci
- 323 EXPERIMENTAL RESEARCH ON THE PERFORMANCE OF POSITIONING AND ORIENTATION OF THE COMPONENTS OF A ROBOTIC CELL
  Valeria Vacarescu, Cella-Flavia Buciuman
- 316 IMPROVING QUALITY AND EFFICIENCY OF ONSITE RAILS REPAIR APPLYING VARIOUS WELDING PROCESSES
  Nicusor Ene, Elena Scutelnicu
- 315 COMPARATIVE STUDY BETWEEN ELECTROSLAG AND SUBMERGED ARC CLADDING
  Elena Scutelnicu, Nicusor Ene
- 314 USING AN AGILE APPROACH IN DEVELOPING A MARKETING PROJECT
  Monica Izvercianu, Cella-Flavia Buciuman
- 313 MODELING THE POSITIONING AND ORIENTATION ERRORS INTO A ROBOTIC FLEXIBLE MANUFACTURING CELL
  Valeria Vacarescu, Cella-Flavia Buciuman
- 309 RESEARCHES ON CORROSION CRACKING PHENOMENON THAT OCCURS ON WELDED MINING EQUIPMENT
  DAN DOBROTA, CĂTĂLIN IANCU
- 303 CONSIDERATION REGARDING THE NECESSARY DEVICE IN OBTAINING A CONSTANT PRESSURE IN ULTRASONIC PROCESSING
  Tilică Teodor Ionuț, Slătineanu Laurențiu, Burian Claudiu
- 302 THE STRENGHT ANALYSIS FOR AN OPTIMIZED CONTAINER SHIP STRUCTURE, BASED ON 3D CAD/CAE TWO CARGO-HOLDS MODEL
  Ionica Rubanenco, Iulia Mirciu, Leonard Domnisoru
- 301 RESEARCHES ON ULTRASONIC ENERGY APLLIED IN JOINTING RUBBER PRODUCTS
  DAN DOBROTA, CĂTĂLIN IANCU
- 292 METHOD FOR PRODUCTION SYSTEM IMLEMENTATION: QUALITY COST ASSESSMENT AND OPTIMIZATION
  Neagoe Lavinia Nicoleta
- 290 VALUE STREAM QUALITY COSTING METHOD
  Neagoe Lavinia Nicoleta 1 & Mărăscu Klein Vladimir2
- 289 Conducting data analysis for electrohydraulic valve tests
  Soimaru C., Jelenschi L., Sandu G.
- 288 Definition of optimum conditions of cutting at drilling of stainless strip Х18Н9Т
  Vadim Boguslavskiy, Tatiana Ivtchenko, Viktor Poltchenko, Iliya Navka, Maria Okulik
- 286 A STUDY ABOUT EXPLORATION AND EXPLOITATION IN A TEAM STRUCTURE
  Iuliana Laura Taranovschi Ferariu & Antonio Messeni Petruzzelli
- 285 THE METHODOLOGY FOR INNOVATIVE MODEL APPLICATION ON THE PUNCHING PROCESS
  Iuliana Laura Taranovschi Ferariu, Petru Duşa, Marius Ionuţ Rîpanu
- 284 HYDRAULIC HYBRID VEHICLE WITH PNEUMATIC ENERGY STORAGE SOLUTION
  Soare, Ionuț Tudor; Radu, Gheorghe Alexandru; Abaitancei, Horia; Radu, Sebastian; Petric, Aron Adrian; Dica (Stanescu), Ruxandra.
- 283 FREEFORM FABRICATION OF CERAMICS DENDRITES FOR FLUCTUATION MODULATIONS IN ENERGY AND MATERIAL FLOWS
  Soshu Kirihara, Yauunori Uehara, Naoki Komori, Maasa Nakano, Satoko Tasaki
- 282 LIFE TIME ESTIMATION OF A KSS MACHINE FOR COAL MOVING MP35 B1 – E.C. TURCENI –part II-modeling and FEA
  Iancu Cătălin, Dobrotă Dan
- 281 FRICTION STIR WELDING USING INDUSTRIAL RONOTS PROGRAMMED WITH ROBOTSTUDIO
  Viorel Cohal
- 280 LIFE TIME ESTIMATION OF A KSS MACHINE FOR COAL MOVING MP35 B1 – E.C. TURCENI –part I-analysis background
  Iancu Cătălin, Dobrotă Dan
- 279 SOME CONSIDERATIONS REGARDING THE ROTOROLLING PROCESS
  Octavian Lupescu, Margareta Coteata, Mihai Boca
- 277 EFFECTIVE METHODS OF THERMAL CUTTING
  Valerii Domin, Valeriy Kovalenko, Pavel Navka & Lidiya Khristoforova
- 276 RESULTS OBTAINED BY NUMERICAL SIMULATION FOR A HYDRAULIC SYSTEM WITH SECONDARY REGULATION
  Vasile Huian, Doru Calarasu, Bogdan Vaceanu, Vasile Nenerica
- 275 INFLUENCE OF DISCRETE SHOCK WAVE ON WET METAL POWDER COMPACTION
  Alexandru Mardari
- 274 The raft davit support structure analysis, based on 3D CAD/CAE-FEM numerical models
  Iulia Mirciu, Ionica Rubanenco, Leonard Domnisoru
- 273 ULTRASONIC MICROJOINTS FOR NONFERROUS MATERIALS Al-Cu
  Cristian Toma, Niculai Pasca , Aurel-Valentin Birdeanu,Octavian Oanca, Cristian Ciuca
- 272 Numerical CAD/CAE-FEM Modelling for cargo tank hatch displacement analysis
  Iulia Mirciu, Ionica Rubanenco, Leonard Domnisoru
- 268 Stresses distributions in bush chains
  Mihai Tiberiu Lates, Radu Velicu
- 263 THE CONTROL OF THE FORCE ACTING ON A SPOOL SLIDE VALVE USING THE PROPERTIES OF THE MAGNETORHEOLOGICAL FLUIDS WITH APPLICATIONS TO THE SERVO-ELEMENTS.
  Adrian Olaru, Doru Calarasu, Mihai Afrasinei
- 258 FINISHING SMOOTHING THE SURFACES OF PARTS
  Dohotaru Ion
- 251 Nondestructive Evaluation of Polyurethane Materials using Transient Thermography
  Mihaela AMARANDEI, Karla BERDICH, Izabella SZIGYARTO, Liviu MARSAVINA
- 247 OPTIMIZATION OF THE FORMING PROCESS IN CASE OF A SQUARE SHAPED PART MADE FROM TAILOR WELDED BLANKS
  Aurelian Albut, Vlad Ciubotariu, Crina Radu, Ionel Olaru
- 246 A HYBRID GENETIC ALGORITHM FOR COMBINATIONAL CIRCUITS PARTITIONING PROBLEM
  Adrian Vilcu, Octav Brudaru
- 245 NEW ASPECTS IN OPTIMIZATION OF BDDS: MIXED TECHNIQUES BASED ON POPULATIONS OF SOLUTIONS AND LOWER BOUND
  Octav Brudaru, Iulian Furdu, Diana Popovici
- 242 ELASTIC FEATURES OF OWN MANUFACTURED METALLIC BELLOWS
  Dan Ghenghea
- 240 DIFERENT SIMULATION METHODS OF ROBOTIC MECHANISMS FOR AUTOMOTIVE INDUSTRY USING MULTICAD ENVIRONMENT
  Horia Cioban, Lucian Butnar
- 239 Order Earning Power assessment of make-to-order manufacturing system
  Daschievici Luiza, Ghelase Daniela
- 238 THE POSSIBILITY OF OBTAINING COMPOSITE AL18Wt%SI/SIC BY COMPOCASTING PROCESS
  Milena Ćosić, Zagorka Aćimović-Pavlović, Anja Terzić, Marina Dojčinović, Ljubica Pavlović
- 237 Job Earning Power assessment of make-to-order manufacturing system
  Daschievici Luiza, Ghelase Daniela
- 236 Operation Earning Power assessment of make-to-order manufacturing system
  Ghelase Daniela, Daschievici Luiza
- 235 A new approach of make-to-order manufacturing system control
  Ghelase Daniela, daschievici Luiza
- 234 The significance of finishing treatments applied onto special clothing
  Gianina BROASCA*, Daniela FARIMA*, Mihai CIOCOIU*, Mirela IORGOAEA*, Narcisa VRINCEANU**,Christine CAMPAGNE***
- 233 RESEARCH CONCERNING THE DEFORMATION FORCES AT COLD TEETHING BY INTERMITTENT BLOW
  Ion Doburescu; Ilarion Banu
- 232 DYNAMIC BEHAVIOR OF POLYESTER FABRICS SURFACE AND THE CORRELATION WITH WATER BARRIER ATTRIBUTES
  ianina BROASCA1, Daniela FARIMA 1, Narcisa VRINCEANU 2 ,Alexandra NISTOR³, Mirela IORGOAEA¹,
- 231 RECONDITIONING OF RODS HAMMER FORGE BY CMT METHOD
  Radu Alexandru Roşu, Nicuşor Alin Sîrbu, Mihaela Popescu, Sorin Drăgoi
- 230 EXPERIMENTAL STUDIES AND COMPUTER SIMULATION OF STRESS IN PLATES WITH ROUND CORNERS CUTTINGS
  Anisoara-Gabriela Cristea, Costel-Iulian Mocanu
- 229 SHORTER C-FRAME FOR THE CRANK MECHANICAL PRESS. STUDY OF THE STRESS AND STRAIN STATE
  Ioan Dan
- 228 PRE-TENSIONED C-FRAME FOR THE CRANK MECHANICAL PRESS. STUDY OF THE STRESS AND STRAIN STATE
  Ioan Dan, Romeo Cioară
- 227 THE LUBRICANT BEHAVIOR IN NANOTRIBOLOGICAL SYSTEMS
  Cristian Pirghie, Ana-Camelia Pirghie, Ilie Musca
- 226 ON THE NANOLUBRICATION AS A FUNCTION OF LOAD AND SPEED WALL
  Cristian Pirghie, Ana-Camelia Pirghie, Ilie Musca
- 223 ROMANIAN INVENTICS IN 2001-2010 YEARS. PATENTS
  Romeo Cioară
- 222 ROMANIAN INVENTICS IN 2001-2010 YEARS. PATENT APPLICATIONS
  Cioară Romeo
- 221 Aspects of modeling and optimizing air circulation currents in a car cabin
  PhD. student Vasile Caunii
- 220 PERFORMANCES OFFERED BY THE FIREPROOFING AND ANTI-CREASING SIMULTANEOUS PROCESS
  Ecaterina Vasluianu, Vasilica Popescu
- 218 AUGMENTED REALITY USED FOR QUALITY CONTROL IN ASSEMBLY PROCESSES
  Ioan Bondrea, Radu Emanuil Petruse
- 217 RESEARCH ON THE INFLUENCE OF THERMAL TREATMENT ON THE CORROSION RESISTANCE OF ZINC ASSEMBLING SHRINK
  SANDA CRETU1, DAN GELU GALUSCA 1
- 216 STUDY ON CORROSION RESISTANCE IN CONTACT AREA OF ASSEMBLING SHRINK
  SANDA CRETU1, DAN GELU GALUSCA 1
- 213 THE ANALYSES OF THICKNESS VARIATIONS
  Elena Mioara Radu, Gheorghe Brabie
- 212 EXPERIMENTAL ANALYSIS OF THE THICKNESS INFLUENCE ON FLC LEVEL IN THE CASE OF THIN METAL SHEETS
  Elena Mioara Radu, Gheorghe Brabie
- 211 Aero-Acoustic properties of eroded airfoils of compressor blades for use in non-invasive diagnostics
  Danuta-Aurica Grad and Valeriu Dragan
- 210 INFLUENCE OF STRESSES DISTRIBUTION ON THE SPRINGBACK PARAMETERS IN THE CASE OF U BENDING PROCESS
  Nanu Neculai, Brabie Gheorghe
- 208 MULTI-DOMAIN CAN GATEWAY FOR COMPLEX MANUFACTURING ENVIRONMENTS
  Florin Catalin Braescu, Lavinia Ferariu
- 207 DETAILED CALCULUS OF THE CHARGE INSIDE THE CRUCHER BALL MILLS TO INCREASE THE PERFORMANCE OF GRINDING
  Mariana Adriana Prichici1, Liliana Indrie2
- 206 The effect of a thin jet over a concave surface-the development of a new high altitude rocket nozzle
  Valeriu Dragan
- 205 Contributions regarding the design of a self super circulated rotary wing
  Valeriu Dragan
- 202 A THERMOMECHANICAL ANALYSIS OF COMPOSITE MATERIALS BASED ON ALUMINUM AT ULTRASONIC WELDING
  Pop-Calimanu Marius, Fleser Traian
- 200 A fully coupled thermomechanical modeling of jointing process by ultrasonic welding of aluminium-based composite materials
  Pop-Calimanu Marius, Fleser Traian, Pop-Calimanu Ioana-Monica
- 199 VARIANT OF BIOCLIMATIC SNAP CAMERA AND BLOCK DIAGRAM FOR ANALYSIS OF COMFORT PARAMETERS
  Luminita Vlad, Stan Mitu, Florin Vlad
- 198 PRODUCT LIFECYCLE MANAGEMENT FOR A MILITARY MAINTENANCE VEHICLE
  Paul Dan Brîndașu, Radu Emanuil Petruse, Daniela Căruțașu, Livia Dana Beju
- 197 INTEGRATION OF PELTIER CELS IN THE NEW TYPES OF CLOTHES STRUCTURES IN ORDER TO ENSURE THE CONDITION OF COMFORT
  Luminita Vlad, Stan Mitu, Florin Vlad
- 195 STUDIES AND EXPERIMENTAL RESEARCH ABOUT THE PROCESSING OF SLOTS BY MEANS OF ELECTRICAL DISCHARGE MACHINING
  Traian Buidoş, Florin-Sandu Blaga, Iulian Stănășel, Mircea-Petru Ursu
- 194 FACTORS WHO INFLUENCE SURFACE ROUGHNESS POLISHING WITH VIBRATORY ABRASIVE BELT
  Carausu Constantin, Pruteanu Octavian, Antohi Cristian & Gramescu Traian
- 193 RESEARCH REGARDING NON CONTACT EXAMINATION OF COMPOSITE MATERIALS
  Gheorghe Amza, Gabriel Dan Tașcă, Zoia Apostolescu
- 192 CONTRIBUTIONS ON THE ENVIRONMENTAL IMPACT OF THE PROCESS OF RECONDITIONING BY WELDING
  Amza Gheorghe1 Paise Liana Sanda1, Dragomir Groza Maria1, Apostolescu Zoia1,
- 191 EXPERIMENTAL RESEARCH ON THE QUALITY OF PROFILES OBTAINED BY FORM TAPPING
  Gina Boicea; Ion Ungureanu; Monica Iordache; Eduard Nitu; Doina Iacomi; Madalin Tudor
- 190 EXPERIMENTAL RESEARCH ON THE QUALITY OF PROFILES OBTAINED BY ROLLING WITH WEDGE TOOLS
  Madalin Tudor; Ion Ungureanu; Doina Iacomi; Monica Iordache; Eduard Nitu; Stefan Tabacu
- 188 Optimization of the EB-remelting parameters on the oxidation behavior of MCrAlY sprayed coatings
  Ion-Dragos Utu, Viorel-Aurel Serban
- 185 CONTRIBUTIONS TO ENVIRONMENTAL DECISION MAKING BY DEVELOPING ENVIRONMENTAL ADAPTIVE DECISION MODELS
  Ionuţ Viorel Herghiligiu, Simona Petronela Epure, Mihaela Luminița Lupu
- 184 Study on the experimental characterization of the layer deformed by radial cold rolling of profiles
  Eduard Niţu, Monica Iordache, Ion Ungureanu, Doina Iacomi, Gina Boicea
- 182 FE-modeling of radial cold rolling of the circular trapezoidal grooves
  Monica Iordache, Eduard Niţu, Doina Iacomi, Ion Ungureanu, Gérard Ferron
- 178 NUMERICAL SIMULATION OF THE SENSORLESS CONTROL FOR AN ELECTRICAL DRIVE SYSTEM WITH BRUSHLESS DC SERVOMOTOR
  Cristina Diaconescu, Gheorghe Ursanu, Gheorghe Baluta
- 177 CONTRIBUTIONS TO INCREASE SAFETY OF OPERATING EQUIPMENT TECHNOLOGY GEAR
  Mazuru, Sergiu 1 , Casian Maxim, Scaticailov Sergiu
- 176 DETERMINATION OF THE COEFFICIENT OF DISTRIBUTION OF ARSENIC DURING LAYER GROWTH OF A SOLID SOLUTION OF PHOSPHIDE-ARSENIDE OF GALLIUM USING THE LIQUID-PHASE EPITAXY METHOD
  Iurie Ciofu, Andrei Ciofu
- 175 OBTAINING SOLDER NANOALLOYS FROM Sn-Cu-P-Ni FAMILY IN RIBON FORM FOR ELECTRONIC COMPONENTS SOLDERING
  Georgiana Melcioiu, Viorel-Aurel Şerban, Cosmin Codrean, Dragoş Buzdugan, Florin Marian Cornea
- 173 CONTRIBUTIONS TO THE STATE OF STRESS AND STRAIN OCCURRING DURING ENDODONTIC TREATMENT WITH ULTRASOUND
  Amza Gheorghe1, Amza Oana Elena2, Apostolescu Zoia1
- 172 Comparative study on the dimensional accuracy and surface quality to cut through unconventional methods of tables
  Eugen Herghelegiu, Carol Shnakovszky, Miroslav Radovanovic, Crinel Ionel Raveica
- 168 A COMPARISON BETWEEN THE TEHORETICAL AND EXPERIMENTAL SHAPE OF A WORKPIECE OBTAINED IN THE TURNING PROCESS
  Mihai Boca, Gheorghe Nagîț & Cătălin Dumitraş
- 164 MANAGEMENT BAZED ON KNOWLEDGE IN THE HEALTH SYSTEM
  kanellopoulos Dimitrios
- 158 OBSERVATION OF CRATERS SHAPE INFLUENCED BY LASER BEAM PROCESSING PARAMETERS ON GLASS MATERIAL
  Ciprian Melian
- 155 MANAGEMENT OF AN ACTIVITY DIFFICULT TO IDENTIFY, LOCATE AND QUANTIFY. CASE STUDY: CARRYING DANGEROUS CONTENTS
  Rachid Chaib, Ion Verzea, Irina Cozminca
- 154 EXPERIMENTAL RESEARCH ON THE IMPACT OF TECHNICAL CONDITION OF LAMBDA SENSORS ON ENGINE VEHICLES EMISSIONS
  MILITARU Florin
- 153 PRODUCT FUNCTIONAL DECOMPOSITION IN AXIOMATIC AND SYSTEMATIC DESIGN
  Banciu Felicia, Drăghici George
- 151 SYNTHESIS OF THE RACK-LEVER DIFFERENTIAL GEAR MECHANISM
  Bahadirov G.A., Abdukarimov A.
- 148 PROCESSING OF THE ACTIVE PARTS OF DIES FOR THE INJECTION OF THERMOPLASTIC SMALL-MODULE GEARS
  Traian Buidoş, Mircea-Petru Ursu, Constantin Bungău, Dan Crăciun
- 146 ATTEMPT TO PREDICT WEAR
  Eugen Pămîntaş
- 145 QUALIFIED SUPPORT FOR TECHNOLOGICAL SETTING ACTIVITIES AT FLAT FORM TURNING
  Eugen Pămîntaş
- 144 STRUCTURAL ANALYSIS OF A KEY COUPLING
  Zahariea Danut
- 143 STRUCTURAL ANALYSIS OF A CONICAL SHRINK FITTING
  Zahariea Danut
- 142 NUMERICAL STUDY OF RESISTANCE FOR A SHIP’S HULL
  Nicoleta-Gabriela Rodicichin, Viorel Andrei
- 141 PROGRAM FOR CALCULATING THE VELOCITY AND PRESSURE DISTRIBUTION AROUND A SHIP’S HULL
  Nicoleta-Gabriela Rodicichin, Viorel Andrei
- 140 ADVANTAGES AND DISADVANTAGES USING VALIDATION SYSTEM IN PUBLIC TRANSPORT VEHICLES
  Patrick Ștefănescu
- 139 Cerium oxide as conversion coating for the corrosion protection of aluminium
  Jelena Gulicovski, Jelena Bajat, Vesna Mišković-Stanković, Bojan Jokić , Vladimir Panić, Slobodan Milonjić
- 137 COST-BASED RISK ASSESSMENT METHODOLOGY FOR THE FAILURE MODE AND EFFECTS ANALYSIS
  Bogdan-Sorin Neagoe
- 134 Non-diagonal coupling between d electrons
  N.E. Dubinin
- 133 THE PLATE SHAPE INFLUENCE OVER THE STRESS VARIATION UNDER THE IMPACT LOADS
  Mirel Balan, Dumitru Lavrente, Manuela Nechita, Andreea Muscalu, Costel Iulian Mocanu
- 132 High speed feed axis used on CNC machine tools
  Funaru Marian, Obreja Claudiu, Mihaila Lucian
- 131 A COMPARISON OF PZT AND MFC PIEZOELECTRIC TRANSDUCERS USED AS ACTUATORS IN VIBRATING MECHATRONIC SYSTEMS
  Marek Płaczek
- 130 Neural network modeling applied to processes based on polyacrylamide hydrogels
  Ciprian George Piuleac, Camelia Mihailescu, Silvia Curteanu
- 128 Surface Properties of Surgical Materials
  Andrei Mihăilescu, Florica Doroftei2, Emil Ghiocel Ioanid, Camelia Mihăilescu
- 127 PARAMETRIZATION OF CATIA SURFACES WITH COMPLEX SHAPE STARTING FROM CLOUDS OF POINTS
  Pescaru, R., Oancea, Gh., Manolescu,Al.
- 126 INFLUENCE OF THE PROCESS PARAMETERS ON THE SURFACE ROUGHNESS OF SPIFed PARTS
  Crina Radu
- 125 EVALUATION OF THE QUALITY OF PARTS PROCESSED BY SPIF
  Crina Radu1 Ion Cristea
- 124 CONSIDERATIONS OF METAL WELDING USING THE ND: YAG LASER
  Vasile Simon, Marcel Popa, Oltean Andrei Ioan, Badiu Ioan
- 123 STUDY THE SAFETY CATCH DEVICES OF EXTRACTION VESSELS USING THE CAD/CAE SOFTWARE
  Dumitrescu Iosif, Itu Vilhelm, Cozma Bogdan
- 122 CONSTRUCTIVE IMPROVEMENTS OF TENSIONING MECHANISM CABLE DEVICES DEC
  Dumitrescu Iosif , Cozma Bogdan, Itu Vilhelm
- 119 DETERMINATION OF STRUCTURAL PROPERTIES OF GLASS/POLYESTER COMPOSITE FOR 10 kW WIND TURBINE BLADES
  Viorel Bostan, Marin Guțu
- 118 ECO-FRIENDLY PROCESS OF DYEING MATERIALS USING BILBERRY ANTHOCYANIN EXTRACT
  Simona Oancea, Diana Coman, Narcisa Vrînceanu
- 116 MODELLING AND OPTIMIZING THE RESISTANCE TO BENDING OF REINFORCED RESIN TYPE COMPOSITE MATERIALS
  Mihai Alin Pop, Vlad Monescu & Alexandru Constantinescu
- 112 STUDY OF THE STRESS STATE AROUND A CRACK IN WELDING LINK BETWEEN TUBULAR BEAMS
  Oana-Mirela DOBROT, Costel Iulian MOCANU
- 110 THE DETERMINATION OF THE CUMMULATIVE DETERIORATION FACTOR IN THE COMPOSITE MATERIALS FATIGUE STRAIN
  Florentina Tocu, Costel Iulian Mocanu, Ovidiu-Alexandru Donu
- 109 STUDY ON THE LAYER STRAIN STATE IN DELAMINATIONS
  Florentina Tocu, Costel Iulian Mocanu
- 108 PRACTICAL ASPECTS REGARDING THE PRODUCTION OF COMPOSITE MATERIALS WITH 3D TEXTILE REINFORCEMENTS
  Savin Dorin Ionesi, Raul Fangueiro, Luminita Ciobanu, Costea Budulan
- 107 THE EXERGETIC OPTIMIZATION OF THE EXPERIMENTAL REGIMES FOR A GAS TURBINE PLANT
  Sorin-Gabriel Vernica, Tudor Sajin, Cătălin Bîrsan
- 106 Modeling and experimental analysis of fluid motion in a new types of plasma generators
  Cătălin Bîrsan, Tudor Sajin , Sorin-Gabriel Vernica
- 103 ASSISTED MODELING OF MOBILE MEDICAL TREATMENT EQUIPMENT, UPPER RESPIRATORY AFFECTIONS
  Adrian Mihai GOANTA
- 102 METHOD FOR CLONING, COMPUTER ASSISTED, A SEQUENTIAL MECHANISM GEAR PROJECT
  Adrian Mihai GOANTA
- 101 LINEARIZATION OF NONLINEAR DYNAMICAL SYSTEMS BY OPTIMIZATION METHOD
  Dumitru Nicoara
- 100 RESEARCHES REGARDING REHABILITATION EQUIPMENT BEHAVIOR USING WINPISA SOFTWARE
  Petre Ioana
- 99 MAS-20-750N-AA-MC-O-ER-BG PNEUMATIC MUSCLE BEHAVIOR UNDER DIFFERENT LOADS
  Petre Ioana
- 98 ACHIEVING VERSATILE CAVITIES IN MOULDS FOR FORMING SOLES DIRECTLY ON THE FOOTWEAR
  Cornelia Ionescu Luca & Rãzvan Mocanu
- 97 ACHIEVING VERSATILE CAVITIES IN MOULDS FOR FORMING PREFABRICATED SOLES
  Cornelia Ionescu Luca1 & Rãzvan Mocanu1
- 96 HEAT TREATMENT OPTIMIZATION FOR THE BEARING RINGS FABRICATION
  Ioan Milosan
- 95 The behaviour to the low temperatures of a chromium-nickel-copper s.g. cast iron
  Ioan Milosan
- 94 HOW TO OPTIMIZE FLEXIBLE MANUFACTURING SYSTEMS
  Ciortea Elisabeta Mihaela
- 92 FEA STUDY ON THE ELASTIC DEFORMATION PROCESS OF A BIMETAL STRIP SUBJECTED TO TEMPERATURE LOAD
  Mihail Aignatoaie
- 91 FEA STUDY ON THE POSSIBILITY OF IMPROVING THE GRODZINSKI METHOD
  Mihail Aignatoaie
- 90 WELD-LINE BEHAVIOUR IN THE CASE OF TWBs DEFORMED USING FORMABILITY TESTS
  Vlad A. Ciubotariu
- 89 Analysis of stress distribution on the drawn U channel parts made from tailor welded blanks as a function of blank holder force
  Vlad A. Ciubotariu
- 88 FUNDAMENTALS OF PRODUCTION WATER MANAGEMENT FOR AN INDUSTRIAL PRODUCTIVE UNIT
  Carmen Zaharia
- 85 APPLICATION OF A PHYSICO-CHEMICAL TREATMENT BASED ON ADSORPTION FOR INDUSTRIAL EFFLUENTS. A CASE STUDY
  Carmen Zaharia
- 83 AN APPROACH ON ULTRASONIC ASSISTED MACHINING
  Cristian-Gheorghe Turc, Dorian Stef, Mihai Nica
- 82 PALLET POSITIONING AND CLAMP/ UNCLAMP MECHANISM USED ON MACHINING CENTRE TABLE
  Mihaila Lucian, Funaru Marian, Obreja Claudiu
- 81 SPECIFIC MECHANICAL PROPERTIES FOR COMPOSITE KNITTED REINFORCEMENTS WITH NATURAL FIBERS
  Ana-Ramona Ciobanu, Raul Fangueiro, Luminița Ciobanu, Costea Budulan
- 80 MECHANICAL BEHAVIOUR OF ARAMID SANDWICH WEFT KNITTED FABRICS
  Ana-Ramona Ciobanu, Raul Fangueiro, Luminița Ciobanu, Costea Budulan
- 79 EFFECT OF A TANGENTIAL FORCE IN ELASTIC PARTIAL SLIP CONTACT
  Sergiu Spinu, Dorin Gradinaru
- 78 NUMERICAL SIMULATION OF TRANSIENT ELASTIC PARTIAL SLIP CONTACT
  Sergiu Spinu, Dorin Gradinaru
- 77 TECHNOLOGICAL ASPECTS OF PRECESSIONAL GEARS MANUFACTURING BY SINTERING FROM METAL POWDERS
  Ion Bostan, Valeriu Dulgheru
- 76 MATHEMATICAL RELATIONSHIP OF THE SURFACE ROUGHNESS AT TURNING OF THE STAINLESS STEEL X2CrNiMo18-14-3
  Ovidiu Blăjină, Vlad Darie, Ruxandra Bălan
- 75 MATHEMATICAL RELATION OF THE FORCE AT WIDENING A 36% GLASS FIBER REINFORCED POLYMERIC COMPOSITE MATERIAL
  Ovidiu Blăjină, Adriana Damian, Aurelian Vlase
- 74 RELATION OF THE CUTTING TOOL WEAR AT DRILLING A 24% GLASS FIBER REINFORCED POLYMERIC COMPOSITE MATERIAL
  Aurelian Vlase, Adriana Damian, Ovidiu Blăjină
- 73 METHOD OF PRODUCTION OF SILVER/MCT-ß-CD INCLUSION COMPLEX GRAFTED ON COTTON
  Octavian Popescu, Aurelia Grigoriu
- 71 SELFADAPTIVE MOBILIZATION AND MEDICAL RECOVERY SYSTEM OF THE UPPER LIMB MUSCLES
  Deaconescu Tudor, Deaconescu Andrea
- 70 BIONIC MEDICAL RECOVERY SYSTEM OF THE WRIST
  Deaconescu Tudor, Deaconescu Andrea
- 69 MATHEMATICAL MODELLING OF SURFACE ROUGHNESS BY THE EXPERIMENTAL DESIGN METHODOLOGY IN BALL END MILLING OF C45 MATERIAL
  Pașca Ioan
- 68 EXPERIMENTAL RESEARCH ABOUT VARIATION OF SURFACE ROUGHNESS FOR DIFFERENT INCLINATION ANGLE IN BALL END MILLING OF C45 MATERIAL
  Pașca Ioan
- 66 THE EFFECTS OF ERROR’S COMPENSATION IN THE MACHINING.
  Toca Alexei, Stingaci Ion
- 65 SOME EXPERIMENTAL ASPECTS CONCERNING A METHOD OF STUDY THE COMPOSITES MATERIALS WITH EPOXY MATRIX
  Aurora-Cătălina Ianăşi1, Nicoleta-Maria Mihuţ1
- 64 A METHOD FOR APPLYING TECHNOLOGY OF COMPOSITE MATERIALS IN REINFORCEMENT OF WOOD BEAMS
  Aurora-Cătălina Ianăşi1, Minodora-Maria Pasăre1
- 63 A NEINTRUSIVE METHOD FOR DETERMINING THE DISCHARGE OF BELT CONVEYED MATERIALS, USING ULTRASONIC SENSORS
  Mihuţ Nicoleta - Maria, Ianăşi Cătălina
- 62 ANALYSIS OF QUARTER PASSIVE SUSPENSION SYSTEM USING SIMULINK
  A. Perescu, L. Bereteu
- 61 ANALYSIS OF QUARTER PASSIVE SUSPENSION SYSTEM WITH 1-DOF AND 2-DOF USING SIMULINK
  A. Perescu, L. Bereteu
- 60 ABOUT MULTITUDE OF EQUATORIAL SPHERICAL HYPOCYCLOID AUTOMATIC MACHINE
  Răzvan Răceu
- 59 NEW EQUATORIAL SPHERICAL HYPOCYCLOID AUTOMATIC MACHINE WITH MORE SATELLITES
  Răzvan Răceu, Cosmina Pöllner
- 58 THE RECOGNITION OF A CREATIVITY STIMULATION METHOD THAT IS SPECIFIC TO DESIGN
  Pralea Jeni, Soltuz Elena, Pop Monica Elena
- 57 MECHANICAL VULCANIZING PRESS WITH NUMERICAL CONTROL
  Cosmina Pöllner
- 56 STAGES OF DESIGNING MECHANICAL VULCANIZED PRESSES
  Cosmina Pöllner, Răzvan Răceu
- 55 Cooling lubrication liquid metal
  Mazuru Sergiu
- 54 MODULAR TOOL CHANGING SYSTEM WITH HIGH STORAGE CAPACITY FOR CNC MILLING CENTERS
  Claudiu Obreja, Mihaila Lucian, Dragos Andrioaia
- 53 DETERMINING THE GEOMETRY ERRORS IN A MECHANISM WITH DELTA TYPE PARALLEL STRUCTURE
  Andrioaia Dragos, Pascu Marius, Obreja Claudiu
- 52 SYSTEM FOR INCREASING THE RIGIDITY OF THE RAM HYDROSTATIC GUIDEWAYS OF THE BORING AND MILLING MACHINES
  Stan Gheorghe, Pascu Marius
- 51 Computer assisted design of ship fire extinguishing system with inert gas
  Leonard Domnisoru, Alexandru Ioan, Dumitru Dragomir
- 50 RULES OF DEFINING SKETCHES IN PRO/ENGINEER WILDFIRE / CREO / CREO PARAMETRIC
  Daniel Manolea
- 49 The CAD/CAE-FEM design of a composite material ROV underwater vehicle
  Leonard Domnisoru, Dumitru Dragomir, Alexandru Ioan
- 48 Linings based chromite for application in foundry
  Aurel Prstić, Zagorka Aćimović-Pavlović, Milutin Đuričić, Anja Terzić, Ljubica Pavlović, Zorica Tanasković
- 47 NON-CONVENTIONAL TECHNOLOGY FOR PROCESSING SPECIMENS OF AMORPHOUS ALLOYS IN RIBBONS FORM USED ON TENSILE TEST
  Florin-Marian Cornea, Viorel-Aurel Şerban, Cosmin Codrean, Dragoş Buzdugan
- 46 Principal components analysis applied on experimental spectra series for ceramic materials characterization
  Daniela Domnisoru, Mirela Praisler, Leonard Domnisoru
- 44 THE RELATIONSHIP BETWEEN SEMIOTIC OBJECT AND INDUSTRIAL PRODUCT DESIGN
  Pop Monica Elena, Pralea Jeni, Pop Tiberiu Viorel
- 43 ANKLE-FOOT ORTHOSIS VIRTUAL MODELING USING REVERSE ENGINEERING
  Mircea Bădescu, Marinela Inţă, Delia Bădescu, Bogdan Pîrvu
- 42 Sound level research of precessional K-H-V reducer
  Malcoci Iulian
- 39 DETERMINATION OF THE OPTIMAL DRYING CONDITION DURING DRYING OF GREEN MASONRY PRODUCTS
  Miloš Vasić, Zagorka Radojević
- 38 SETTING PARAMETERS OF GEAR-HOBBING MACHINE BY PROCESSING OF TEETH OF HUB OF GEAR CLUTCH WITH SPATIAL GEOMETRY
  Roman Grubka, Alexandr Mikhailov, Irina Petryaeva, Olga Kulbida
- 35 ABOUT EFFECTIVENESS OF QUALITY IMPROVEMENT ACTIONS
  Cătălin Ungureanu
- 33 A STRESS ANALYSIS OF A HIPERSTATIC STRUCTURE USING FINITE ELEMENT METHOD AND STRAIN GAUGE MEASUREMENT
  Cosmin Mihai Miriţoiu, Dan Ilincioiu
- 32 COMBINED ANALYTICAL AND FINITE ELEMENT METHODS USED FOR STRENGTH ANALYSIS OF A HIPERSTATIC METALLIC STRUCTURE
  Cosmin Mihai Miritoiu, Dan Ilincioiu
- 31 POSITION CONTROL OF DC SERVOMOTORS WITH PICDEM MC LV DEVELOPMENT BOARD
  Gheorghe Baluta, Gheorghe Ursanu, Cristina Diaconescu
- 29 ABOUT THE RELATIVE RATE OF DRAWING DURING THE METALS PROCESSING IN ULTRASOUND FIELD
  Bogdan – Lucian Gavrilă, Mihai Susan, Elena Chirilă, Viorel Iliescu, Oreste Cristodulo
- 26 Input data aquisition and conditioning for monitoring of cutting tools state
  Achim Muntean, Marinela Inta
- 21 GENERAL APPROACH TO DEVELOPMENT OF MACHINE BUILDING COMPOSITION TECHNOLOGIES
  Aleksandr Mikhaylov, Aleksandr Nedashkovskiy, Dmitriy Mikhaylov, Anna Dolgikh
- 20 RETURNS ANALYSIS, BENCHMARKING AND FIELD ANALYSIS IN DEVELOPMENT
  Florina-Cristina Filip
- 19 DESCRIPTION OF CONTINUOUS IMPROVEMENT PROCESS FOR EFFICIENT MANAGEMENT OF PRODUCTION SYSTEMS
  Florina-Cristina Filip, Vladimir Marascu-Klein
- 17 ECONOMIC EFFICIENCY ANALYSIS OF INVESTMENTS
  Dumitru Nedelcu & Gheorghe Cretu
- 16 EXTENSION OF REAL-TIME PATIENT MONITORING SYSTEMS ON MOBILE PLATFORMS
  Hariton Anamaria, Nita Lucian, Cretu Mihai
- 15 INDUSTRIAL EQUIPMENT MODELING IN REDESIGN USING VALUE ANALYSIS
  Chichernea Florin
- 11 DESIGNING A CAD TRAINING UNIT. PROGRAMMING AN INTERACTIVE DESIGN TASK
  Ionel Batog
- 10 Functional-oriented approach for analysis of physical-mechanical processes in the cutting zone
  Alexandre Mikhailov, Elena Sydorova, Sergey Selivra
- 9 DYNAMIC MODELING OF TECHNICAL SYSTEM TRACTOR – SEED DRILL
  Florin Loghin, Ionuţ Căpăţînă, Tudor Adrian Ene
- 8 The in-depth analisys of laser marking on the Nimonic 86 superalloy for aeronautical applications
  Stefan Rusu, Dan-Gelu Galusca, Aurelian Buzaianu
- 7 Neural network model for the output prediction of traceability laser marking processes
  Stefan Rusu, Dan-Gelu Galusca, Ioan Rusu
- 6 BEARINGS FOR HIGH SPEED
  Valeriu Mironescu
- 5 OPTIMIZATION OF THE CLEARANCES AND FRICTIONS FOR NEEDLE BEARINGS
  Valeriu Mironescu