Modern

Modern means to be new, to be in accordance with the contemporary stage of civilization, to correspond to the actual technical progress.

Technologies

Technologies are one of the motors of the social, economical and scientific progress.

Quality

Quality is, in the broad sense, a degree of excellence which express the extent that something is suitable for the purpose for which it was created and, in effect restricted, represents compliance with the requirements, lack of defects, or to the satisfaction of customer needs .

Innovation

Innovation has to characterize the activity developed by the engineers and scientists.

Full papers Conference ModTech 2009

Full papers accepted:

- id
- title
- authors
- 335
- A TECHNIQUE TO OBTAIN HIGH FILLED EPOXY COMPOSITES
- Vasile Bria, Iulian-Gabriel Bîrsan, Adrian Cîrciumaru & Victor Ungureanu
- 331
- TAILORING THE INTERFACE FOR FABRIC BASED EPOXY COMPOSITES
- Adrian Cîrciumaru, Iulian-Gabriel Bîrsan, Vasile Bria & Victor Ungureanu
- 328
- CAD import and offline simulation welding robots in RobotStudio
- Cohal Viorel, Gîdinceanu Cristian
- 327
- Offline programming welding robots and simulation in RobotStudio v5.10
- Cohal Viorel, Gîdinceanu Cristian
- 323
- ANALYSIS OF TRANSMITTED REGIMES OF WEDGE-BELT VARIATORS
- BAHADIROV GAYRAT, RIZAEV ANVAR, NABIEB MUHAMMADJON, BAHADIROV KUDRATHON
- 320
- Connection between Preheating Temperature and Current in Welding Process
- Ghenghea L.D.
- 319
- Method for the complete control of the geometric and constructive elements of the cutting tools.
- Strajescu Eugen, Popov (Stefu) Olimpia
- 311
- CONSIDERATIONS CONCERNING THE WORK IN DYNAMIC REGIME OF DIESEL ENGINES USED IN NAVAL PROPULSION
- Mihai SIMIONOV
- 307
- CONTRIBUTIONS TO THE IMPROVEMENT THE NICKEL BRONZE GRAPHITE COMPOSITE MATERIALS FOR FRICTION APPLICATIONS
- IVANUS RADU CRISTIAN
- 306
- COPPER BIORECOVERY FROM ELECTRONIC SCRAP USING ULTRASOUND
- IVANUS RADU CRISTIAN
- 300
- A PRELIMINARY OPTIMIZATION STUDY APPLIED FOR A HOMOGENOUS OXIDATION WITH HYDROGEN PEROXIDE OF AN INDUSTRIAL WASTEWATER
- Carmen Zaharia
- 296
- STUDY OF STRESS STATE IN AN EXPERIMENTAL DEVICE FOR PRECISION SHEAR CUTTING
- CIOARĂ RUXANDRA, CIOARĂ ROMEO
- 295
- ABOUT STRUCTURE OF THE MAIN LINKAGES ON COLD FORMING MACHINE-TOOLS
- CIOARĂ ROMEO
- 294
- INTEGRATED APPROACH OF THE DIMENSIONAL CONTROL IN TURNING PROCESS
- Ionut Clementin Constantin, Alexandru Epureanu, Mihaela Banu, Vasile Marinescu & Florin Bogdan Marin
- 293
- HOLONIC FEEDRATE SCHEDULING
- Florin Bogdan Marin, Alexandru Epureanu, Mihaela Banu, Vasile Marinescu & Ionut Clementin Constantin
- 292
- Identification of dislocation patterns in nanostructured materials
- A.Buruiana, M.Banu, A. Epureanu, V. Marinescu
- 291
- Improving the manufacturing process of a cast part using Kaizen methodology
- Florin Buruiana, Mihaela Banu, Alexandru Epureanu, Alice Buruiana
- 290
- STUDY REGARDING THIN PLYWOOD STRUCTURE, AS A DETERMINANT FACTOR OF THEIR ELASTICITY
- Rodica SAVA
- 289
- Cooling rate dependance on mould thickness for aluminum alloy casting
- Florin Susac, Mihaela Banu, Alexandru Epureanu
- 286
- OPTIMIZATION OF THE FLEXIBLE MACHINE TOOLS CONFIGURATION FOR THE TECHNOLOGICAL PROCESS EQUIPPING
- Aurel Costea, Nicoleta Rachieru, Raluca Magdalena Nita, Marin Gheorghe
- 285
- THE COMPUTER MODELING FOR THE ROTARY BURS WITH THE SPECTRAL EDGE DISTRIBUTION
- Liu Huran, Wang Can, Liu Quanhong, Zou Changpin
- 280
- FINITE ELEMENT ANALYSIS OF THE GEOMETRY OF THE TOOLS
- Monica Iordache
- 279
- EXPERIMENTAL INVESTIGATIONS AND FINITE ELEMENT SIMULATION OF THE MARCINIAK PUNCH TEST
- IORDACHE MONICA
- 275
- Algorithm and soft to make graphical representation of bi-dimensional systems chaotic dynamics, with application in technological system stability control.
- Gabriel Frumusanu
- 272
- BBUSINESS INTEGRATED MANUFACTURING MODEL
- Daniela Ghelase, Luiza Daschievici, Alexandru Epureanu & Constantin Falticeanu
- 270
- MODELING OF THE MANUFACTURING SYSTEM COMPETITIVENESS
- Luiza Daschievici, Daniela Ghelase, Alexandru Epureanu & Constantin Falticeanu
- 269
- THE THICHNESS OF INTERPENETRATION LAYER AT THE INJECTION MOLDING BI-COMPONENTS PARTS
- Sorin Ilie1, Ştefan Mihăilă, 2, Flavius Ardelean 2
- 268
- IMPROVEMENT OF THE FEEDING SCREW TIP IN THE CASE OF THE PLASTIC INJECTION MACHINES
- Flavius A. Ardelean, Ştefan Mihăilă, Sorin Ilie
- 267
- CONSTRUCTIVE SOLUTIONS REGARDING THE OPTIMISING OF SEMIMOULD INJECTION TEMPERATURE TO CONCAVE PIECES SHAPE
- Ştefan Mihăilă1, Sorin Ilie 2, Flavius Ardelean 1
- 264
- Analysis of the reliability of the water meters using the failure tree method
- Clinciu Mihaela Rodica
- 263
- ESTIMATING THE STATISTICAL PARAMETERS FOR DATA SAMPLES IN AN EXPERIMENTAL INSTALLATION
- Clinciu Mihaela Rodica
- 262
- MAPPING APPLICATIONS IN 3D STUDIO MAX USED FOR ILLUSTRATING THE TECHNOLOGICAL DIMENSIONING METHOD
- Clinciu Ramona
- 261
- APPLICATIONS ILLUSTRATING COMMON INTERSECTIONS OF SOLIDS IN TEACHING TECHNICAL DRAWING
- Clinciu Ramona
- 253
- Vibrations analysis of an heavy truck with two identical engines
- Anghel Chiru, Sorin Vlase,Carol Ambrus, Dumitru Nicoara, Ioan Pirna, Anca Stanciu
- 252
- Use of the Law of Mixtures in the Mechanical Identification of Composite Materials
- Anghel Chiru, Sorin Vlase,Leonte Petric,Arina Modrea, Ioan Pirna, Virgil Mihalcica
- 247
- METHOD TO DETERMINE THE GRENDE MOTION LAW
- Tudor CHERECHEŞ1, Tiberiu HOMUTESCU2
- 246
- Study concerning the forces of chip removal to the remaking through turn in longitudinal of the polyamide PA 66
- Marin MOŢOI – CRISTESCU
- 245
- Analysis the influence of the parameters of the regime of chip removal through the report the signal – the noise to at the turning of the polyamide PA 66
- Marin MOŢOI – CRISTESCU
- 242
- INTELLIGENT FIXING SYSTEMS ON MULTIFUNCTIONAL MACHINE TOOLS
- Raluca Magdalena Nita, Stefan Craciunoiu, Valeriu Avramescu, Gheorghe Marin, Adrian Lucian Ghionea
- 239
- On the pre-tensioning technique of PMC-tubes for a ultralight wheel chair with applications in the medical technique
- Grigore Stanca, Florin Teodorescu, Valeriu Avramescu, Horatiu Teodorescu, Stefan Craciunoiu
- 236
- INTEGRATED VIRTUAL CONCEPT FOR COMPLEX SURFACES GENERATING BY OPTIMIZED COMMAND OF THE CNC MULTIFUNCTIONAL MACHINES TOOLS WITH A LARGE NUMBER OF AXIS
- Roxana Grejdanescu, Valeriu Avramescu, Stefan Popescu, Eugen Strajescu
- 235
- THEORETICAL ASPECTS REGARDING THE VIBRATIONS REDUCING OF THE MACHINES TOOLS WITH A NONCONVENTIONAL MATERIALS STRUCTURE
- Loredana Paun, Valeriu Avramescu, Stefan Craciunoiu, Nicolae Predincea
- 230
- STATIC BEHAVIOUR OF AN ADVANCED ULTRA-LIGHT SANDWICH COMPOSITE STRUCTURE FOR A WHEEL CHAIR
- Florin TEODORESCU, Grigore STANCA, Condurache DUMITRU, Valeriu AVRAMESCU, Raluca Magdalena NITA
- 229
- REOPECTIC MATERIALS FOR NANOFINISHING BY AFM
- Valeriu AVRAMESCU, Maria FITI, Norvegia Elena AVRAMESCU, Nicolae IONESCU, Aurelian VISAN, Roxana GREJDANESCU, Gheorghe ORASANU, Loredana Theodora PAUN, Catalin Horia ORASANU
- 227
- THE MOMENT OF INERTIA CALCULATION WITH AUTOCAD SOFTWARE
- Adina Rusu
- 225
- Calculation of a new regression relation of the cutting moment when enlarging the holes in steel 2MoNiCr175
- Maturin Sime, Constantin Minciu & Aurelian Vlase
- 224
- Calculation of a new regression relation of the cutting force when enlarging the holes in steel 2MoNiCr175
- Maturin Sime, Aurelian Vlase & Constantin Minciu
- 223
- DESIGN AND MANUFACTURING AN ABRASIVE FLOW MACHINING EQUIPMENT
- Aurelian Vişan, Nicolae Ionescu, Valeriu Avramescu, Gheorghe Orăşanu
- 222
- Mathematical models for the human body motions analysis.
- Mihai Tofan, Ioan Burca, Mircea Mihalcica, Eugenia Secara, Romeo Hisom, Ionatan Popa
- 221
- An analysis of the human motion using Vibe functions
- Mihai Tofan, Ioan Burca, Virgil Mihalcica, Sorin Vlase, Eugenia Secara, Violeta Mnteanu
- 220
- IMPROVEMENT OF PRODUCT QUALITY BASED ON TAGUCHI METHOD
- Nadia Belu, Daniel - Constantin Anghel & Ilarion Banu
- 214
- Theoretical research on the dynamics of the tractor-blade
- Padureanu Vasile
- 213
- SOME ADVANCED SYMMETRIC COMPOSITE LAMINATES SUBJECTED TO OFF-AXIS LOADING SYSTEMS. A STIFFNESS EVALUATION
- Horatiu Teodorescu-Draghicescu, Sorin Vlase, Maria Luminita Scutaru, Dana Luca Motoc & Violeta Guiman
- 212
- AVERAGING METHODS IN THE MICROMECHANICS OF PRE-IMPREGNATED COMPOSITE MATERIALS
- Horatiu Teodorescu-Draghicescu, Sorin Vlase, Anghel Chiru, Ramona Purcarea & Ionatan Popa
- 211
- HEATING RADIANT SYSTEMS MANUFACTURED FROM ADVANCED COMPOSITE MATERIALS
- Dorin Rosu, Horatiu Teodorescu-Draghicescu, Sorin Vlase, Maria Luminita Scutaru, & Alexandru Teisanu
- 210
- The influence of the deformation grade upon the form, roughness and microhardnes of the surfaces processed through cold plastic deformation
- Petre Leonte ,Octavian Pruteanu, Constantin Carausu & Catalin Serban
- 209
- The Tangential Ring Wheel Tool
- Ionuţ Popa, Gabriel Dura, Virgil Teodor, Nicolae Oancea
- 206
- Calculation of a new regression relation of the cutting moment when enlarging the holes in steel OLC45
- Constantin Minciu, Aurelian Vlase & Maturin Sime
- 205
- Calculation of a new regression relation of the cutting force when enlarging the holes in steel OLC45
- Constantin Minciu, Maturin Sime & Aurelian Vlase
- 204
- The influence of entrance parameters
- Apetrei L.1, Oanca O., Toma C., Sirbu A., Munteanu A.
- 198
- CLUTCH WEAR DIAGNOSIS USING FUZZY TECHNIQUES
- Ioan Ţarcă , Florin Blaga, Voichita Hule & Alexandru Pele
- 196
- DETERMINATION OF RESIDUAL STRESSES AND SPRINGBACK GENERATED BY TENSILE LOADINGS IN METAL SHEETS
- Gheorghe Brabie& Neculai Nanu
- 195
- Aircraft Performance Improvements by Using New Concept of Adaptive Wing
- Camelia NICULIŢĂ, Ioan CÂNDEA, Andrei BENCZE
- 194
- RELIABILITY DISTRIBUTION APPLIED TO FLEXIBLE COMPONENTS
- Bejan C, Lihtetchi I, Ambrus C.
- 190
- Theoretical and experimental researches regarding finding out of a regresion functions at EDM manufacturing
- Iuras Emilia, Anton Oana, Cretu Sanda
- 187
- SPRINGBACK REDUCTION BY USING IN THE FORMING PROCESS DESIGN THE NEURAL NETWORKS OR FUZZY LOGIC METHODS
- Gheorghe Brabie & Costache – Radu Mioara
- 181
- THE APPLICATION OF THE TIME-TEMPERATURE SUPERPOSITION FOR THE PREDICTION OF THE PROPERTIES OF GFRPs
- Fabrizio Quadrini, Loredana Santo, Giuseppina Simone, Vincenzo Tagliaferri & Federica Trovalusci
- 180
- THE USE OF CRITICAL PATH METHODS IN MANAGEMENT OF THE REPAIR ACTIVITIES
- Florin Blaga, Traian Buidos, Iulian Stanasel & Alin Pop
- 179
- CAE ANALYZE OF REACTION FROM PLANETARY PRECESSIONAL TRANSMISSION
- Anatolie Sochirean
- 177
- Non-conventional heating equipments used for liquid food pasteurization with microwave energy
- Andreea-Manuela CONSTANTIN, Laurentiu Emanuel ZELENYAK
- 170
- OPTIMISING THE GEARS WITH ASYMMETRIC INVOLUTE TEETH BY MODIFICATION THE GENERATION GEAR RACK ANGLES
- Flavia Chira, Mihai Banica, Lucian Butnar, Liliana Dragan
- 169
- IMPROOVING THE NONSTANDARD GEARS TRANSMISSION PERFORMANCES BY USING DIFFERENT GENERATION GEAR RACK
- Flavia Chira, Lucian Butnar, Mihai Banica, Liliana Dragan
- 166
- Modeling through the FEA method of a braided artificial muscle
- Dragan Liliana, Cioban Horia, Chira Flavia
- 165
- Designing and realization of an experimental stand for testing of a revolute jointdriven by pneumatic muscles
- Dragan Liliana, Nicoara Ioan, Chira Flavia
- 161
- OPTIMISATION OF A MILLING PROCESS BASED ON SIMULATED RESPONSE SURFACE METHODOLOGY
- Ricardo Morgado, Laurenţiu Slătineanu, António Gonçalves-Coelho & António Mourão
- 160
- INSPECTION WITH INFRARED THERMOGRAFHY OF LAYERED AND HIBRYD COMPOSITES MATERIALS USING LOCKIN METHOD
- Boritu Andreea, Anghel Viorel, Mircea Gavan, Nicolae Constantin, Tanase Dragos, Codrut Dan
- 156
- Experimental study of fricction coefficient in orthogonal milling
- F. Santos, M. San Juan, O. Martin, R. Lopez, F. Negoescu
- 155
- HUMAN IDENTIFICATION USING BODY SEGMENTS MOVEMENT ANALYSIS
- Prof. Dr. Ing Chiru Anghel, Drd. Ing Mihalcica Mircea
- 153
- FRICTION STIR WELDING OF AL 6082 ALLOY
- Radu Cojocaru, Dorin Dehelean, Ramona Gabor, Cristian Ciucă, Uros Zupanc
- 152
- RESEARCH INTO ENERGY COMSUPTION AND EFFICIENCY OF BREAD PROCESSING UNITS WITH FOCUS ON BREAD OVEN
- BICA CRISTINA MARIA, NAZARU ANA MARIA
- 149
- THE MODELING OF THE HELICAL DRILL USING AROXIMATING BEZIER POLYNOMIALS
- Ionut Popa, Gabriel Dura, Loredana Bizim, Nicolae Oancea
- 147
- RESULTS ON MICRO-HARDNESS MODIFICATIONS IN THE SURFACE LAYER AT INTERNAL GRINDING
- Vasile Merticaru jr., Cristina Hîncu & Ştefania-Luminiţa Agachi
- 146
- Machinability by electrochemical discharge machining
- Coteata, M., Mourao, A., Pop, N., Ciofu, C.
- 144
- PRODUCT DESIGN MODELS, METHODS AND TOOLS KNOWLEDGE SYNTHESIS
- Banciu Felicia, George Drăghici and George Belgiu
- 143
- CONSIDERATIONS FOR OPTIMIZATION THE PROCESS OF CUTTING THREAD WITH TAPS
- Timofte Chirugu Gianina , Paraschiv Dragos,Chirugu Marius, Stepan Kristoforian
- 139
- TOTAL PRODUCTIVE MAINTENANCE ARCHITECTURE FOR FUTURE MACHINING PROCESSES
- Eugen Pamintas, Cristian-Gheorghe Turc
- 138
- INTEGRATION OF CONTROL AND MAINTENANCE IN MACHINING PROCESS AS AN INTERMEDIARY STEP
- Eugen Pamintas, Felicia Veronica Banciu
- 137
- SOME ASPECTS CONCERNING THE PHYSICAL MODELS OBTAINED USING HIGH SPEED MACHINING
- Ciprian Ciofu, Dumitru Nedelcu & Tataru Mihai
- 133
- MONITORING THE OVERALL EQUIPMENT EFFECTIVENESS IN AN INDUSTRIAL PROCESS USING SYSTEMS OF SUPERVISORY, CONTROL AND DATA ACQUISITION
- Valentin Lupu, Petru V. Dusa &Iustina-Elena Rotman
- 131
- The importance of ecology as collective descriptive and experimental knowledge in industrial design
- Monica Pop, Jeni Pralea, Magda Sficlea
- 130
- The concept of ecodesing in university curricula for the field of industrial design
- Magda Sficlea, Jeni Pralea, Monica Pop
- 128
- The raise in quality of the industrial product by using certain ecological materials, technologies and strategies
- Jeni Pralea, Magda Sficlea, Monica Pop
- 127
- Conceptual routes in the design process intended for the eclogical product
- Jeni Pralea, Magda Sficlea, Monica Pop
- 125
- SPECIFIC ASPECTS ON YARN TENSIONS PRODUCED DURING THE RING SPINNING FRAMES OPERATING
- Hanganu Lucian Constantin, Bodi Gheorghe, Sirbu Ionel
- 124
- CONTRIBUTIONS TO RING SPINNING FRAMES DYNAMICS
- Hanganu Lucian Constantin, Sirbu Ionel, Bodi Gheorghe
- 123
- DYNAMICS OF YARNS PRODUCED ON RING SPINNING FRAMES - A MATHEMATICAL MODEL
- Hanganu Lucian Constantin, Grigoras Stefan, Ianus Gelu
- 122
- Experimental Study for Determination of the Fracture Mechanics Parameters at Welded Steel Bridges in Use
- A. Gido
- 121
- PARTICULARITIES OF THE EXECUTION TECHNOLOGIES ION PLASMA VAPORATIONS COATING TOOLS
- Aleksander Mikhaylov, Abdul-Jaleel H. Majeed, Elena Mikhaylova,
- 120
- PREMISES FOR ELABORATION OF THE SYSTEM OF A TECHNICAL EDUCATION FROM 3 CYCLES
- Petru Todos, Alexei Toca
- 118
- ABOUT SOME OF SLIDE BEARINGS’ CHARACTERISTICS, TERM TO THE MATERIALS WHICH ARE MADE FROM
- Agachi Stefania- Luminita, Nagit Gheorghe , Dodun Oana , Burlibasa Carmen
- 117
- AN ENVIRONMENTAL IMPACT ASSESSMENT APPLIED FOR A MULTIFUNCTIONAL PETROL STATION
- Carmen Zaharia
- 116
- ELECTRICAL DISCHARGE MACHINING PERFORMANCE OF SiC/Al HYBRID COMPOSITE MATERIALS
- Adrian Iosub, Florin Negoescu
- 115
- VIBRATION AMPLITUDE AS A FUNCTION OF FILLING RATIO AND DIMENSIONS OF BALLS MILLS
- Mariana Adriana Prichici, Liliana Indrie
- 114
- MODEL MECHANIC APPROACH OF “ DIVIDED MASS IN n BAR“ FOR THE CALCULUS OF VIBRATION AMPLITUDE OF BALL MILLS
- Mariana Adriana Prichici, Liliana Indrie
- 113
- EVALUATION OF SPECTRAL RESPONSE IN THE AUSTENITIC STEEL ALLOY 10TiNiCr180
- Zăgan R. , Petculescu P., Bormambet M., Petculescu G.
- 112
- SPECTRAL CHARACTERIZATION OF W4541 STAINLESS STEEL, FOR STRUCTURAL COMPONENTS IDENTIFICATION
- Zăgan R. , Petculescu P., Bormambet M., Petculescu A.
- 111
- UPON THE SPARE PARTS STOCKS UTILIZATION IN TECHNOLOGICAL EQUIPMENTS PREDICTIVE MAINTENANCE
- Ramona Popa , Ionut Popa , Octavian Lupescu & Cristian Ulianov
- 110
- USING THE TECHNOLOGICAL EQUIPMENTS AVAILABILITY WEIR TO EVALUATE THEIR LIFE CYCLE TIME
- Ionut Popa , Octavian Lupescu , Ramona Popa & Ovidiu Sava
- 109
- CONTRIBUTIONS REGARDING THE REALIZATION OF A DEVICE FOR ROTOROLLING LONG EXTERNAL CYLINDRICAL SURFACES
- Ovidiu Sava, Octavian Lupescu, Ionut Popa & Ramona Popa
- 107
- Influence of the grinding parameters on the characteristics of gears teeth outer layer. Second part
- Ion Bostan, Sergiu Mazuru
- 105
- Experimental researches regarding the working conditions for cold plastic deformation of metals
- Petre Leonte, Octavian Pruteanu, Constantin Carausu & Corneliu Pricope
- 103
- ABOUT PLM SYSTEMS AS AUTOMATION TOOLS FOR CONCURRENT ENGINEERING ACTIVITIES
- Vasile V. Merticaru, Gavril Muscă & Elena Muscă
- 101
- MATLAB SOFTWARE TO COMPUTE THE RESULTANT FORCE AND THE RESULTANT MOMENT OF A SYSTEM OF FORCES
- Radu Ibanescu
- 99
- ELIMINATION TECHNIQUES OF MICROBIOLOGICAL AGENTS IN WATER PURIFICATION PROCESSES WITH UV RADIATION
- Badea_Cristinel, Nedelcu_Dumitru, Volf_Irina
- 93
- Advantages and problems regarding the applications of glass fiber reinforced polymers
- Lucian Blaga
- 92
- DECISION MAKING PROCESS IN PROJECT MANAGEMENT
- Romeo-Mihai Ciobanu, Lucian Tabacaru
- 91
- STUDY REGARDING THE DEFORMABILITY OF THE MATERIAL SYSTEMS DURING THE LASTING PROCESS
- FLORENTINA HARNAGEA
- 90
- Quality assurance for the glove manufacturing
- FLORENTINA HARNAGEA
- 88
- THE INFLUENCE OF WORKING PARAMETERS ON PRECISION IN PROCESSING BY CIRCULAR VIBRO-HONING, PROCESSING OF PIECES MADE OF CAST IRON 250
- Lucian Tabacaru, Romeo Ciobanu & Ionel Sarbu
- 87
- THE INFLUENCE OF WORKING PARAMETERS ON PRECISION IN PROCESSING SHORT, INTERIOR, CIRCULAR HONING, PROCESSING OF PIECES MADE OF CAST IRON 250
- Lucian Tabacaru, Florinel Munteanu, Dumitru Nedelcu & Octavian Pruteanu
- 86
- INFLUENCE OF THE GRINDING PARAMETERS ON THE CHARACTERISTICS OF GEARS TEETH OUTER LAYER. FIRST PART
- Sergiu Mazuru
- 84
- INJECTION MOULDING OF DISCRETE LONG-GLASS-FIBRE REINFORCED POLYPROPYLENE (LGFRP
- Loredana Santo, Fabrizio Quadrini, Vincenzo Tagliaferri & Federica Trovalusci
- 83
- SOME CRM PRINCIPLES AND STRATEGIES APPLIED IN BRANDING AN INSTITUTION OF ENGINEERING EDUCATION
- Vasile V. Merticaru & Melike Demirbag Kaplan
- 82
- SOME PHENOMENOLOGICAL ASPECTS AT THE ULTRASONIC MACHINING
- Laurenţiu Slătineanu, Loredana Santo, Oana Dodun, Dumitru Uliuliuc, Lăcrămioara Apetrei
- 81
- Software Approach to Electrical Discharge Machining Monitoring
- Cristian-Gheorghe Turc and George Belgiu
- 80
- Hardware Approach to Electrical Discharge Machining Monitoring
- Cristian-Gheorghe Turc, Eugen Pamintas
- 79
- PROCEDURE FOR MODELING EXPERIMENTAL DATES USING THE FOURIER FUNCTION
- Mariana Driscu
- 78
- A method to approximate a spatial surface using a Bézier bi-cubic surface
- Mariana DRIŞCU
- 76
- MODERN INSTRUMENTS OF TRANSFER OF GEOMETRICAL PATTERNS IN DESIGNING BUILDING MACHINES AND EQUIPMENTS
- Goanta Adrian Mihai
- 75
- THE THREE-DIMENSIONAL SHAPING OF THE BRAKE PUMP WITH DOUBLE CIRCUIT USING INFORMATICAL SYSTEMS OF DESIGN
- Goanta Adrian Mihai
- 74
- NUMERICAL STUDY IN DEEP DRAWING WITH SEGMENTED BLANK HOLDER
- Viorel PAUNOIU, Dumitru NICOARA
- 73
- CASE STUDY OF HEAT TRANSFER PROCESSES IN FLAX AND HEMP MELTING TANKS USING GEOTHERMAL WATER
- Liliana Indrie, Sabina Gherghel, Mariana Prichici, Ioan Almăşan
- 72
- USING SIMULINK/MATLAB SOFTWARE TO SIMULATE THE OPERATION OF LIBERIAN FIBRES PROCESSING CENTRE DURING THE COLD SEASON
- Liliana Indrie, Sabina Gherghel, Mariana Prichici, Ioan Almăşan
- 71
- SOME ASPECTS CONCERNING THE DIAMETER ERRORS IN BAR TURNING
- Mihai Boca, Gheorghe Nagîţ, Iolanda Poşchin, Sorin Popa
- 70
- MANAGEMENT, INNOVATION AND COOPERATION IN AEROSPACE ENGINEERING
- VIRGIL STANCIU, DANA-CRISTINA TONCU AND GHEORGHIŢǍ TONCU
- 69
- SOME CONSIDERATIONS CONCERNING THE ABRASIVE JET MACHINING
- Potârniche Ştefan, Slătineanu Laurenţiu, Gonçalves-Coelho António, Focşa Vasile, Coteaţă Margareta
- 68
- CONTRIBUTION OF THE FOOTWEAR OUTSOLES MOULDS PROGRAMMING MADE ON INJECTION EQUIPMENTS
- Ionescu Luca Cornelia
- 67
- SOME CONTRIBUTIONS IN THE DESIGNING OF THE INJECTION SYSTEMS OF THE MOULD CAVITIES IN SHOES INDUSTRY
- Ionescu Luca Cornelia
- 66
- THERMICAL CALCULATION OF THE FOOTWEAR OUTSOLES MADE THROUGH VULCANIZATION IN MOULDS
- Elena Chirila, Ionescu Luca Cornelia
- 65
- THERMICAL CALCULATION OF THE FOOTWEAR OUTSOLES MADE THROUGH INJECTION IN MOULDS
- Elena Chirila, Ionescu Luca Cornelia
- 63
- ROBUSTNESS OF SYSTEMS- KNOWLEDGE AND UNCERTAINTY
- Rominu Silvia, Ionita Oana
- 62
- DETERMINATION OF THE REGRESSION RELATION OF THE CUTTING FORCES FOR TURNING OF THE STAINLESS STEEL 20MoCr130
- Aurelian Vlase, Ovidiu Blăjină & Maturin Sime
- 61
- DETERMINATION OF THE REGRESSION RELATION OF THE CUTTING MOMENTS FOR WIDENING OF THE STAINLESS STEEL 4NiCr180
- Aurelian Vlase, Ovidiu Blăjină & Maturin Sime
- 60
- ASSEMBLING OF THE 800W MAGNETRON ANODIC BODY BY BRAZING IN A CONTROLLED ATMOSPHERE OVEN
- BUIDOŞ TRAIAN, URSU MIRCEA-PETRU, STĂNĂŞEL IULIAN
- 59
- MODULAR DEVICE FOR MANUFACTURING OF THE 800W MAGNETRON ANODIC BODIES BY MEANS OF ELECTRIC DISCHARGE MACHINING
- BUIDOŞ TRAIAN, BLAGA FLORIN
- 57
- STRESSES AND DEFORMATIONS IN THE CONTACT ZONE OF A LONGITUDINAL SECTION BETWEEN CYLINDERS OF COLD ROLLING
- Aurel-Dan Maimon, Liviu Stoicescu
- 54
- CONSIDERATIONS REGARDING ON THE USE OF SLIP LINES METHOD FOR DETERMINING EFFORTS AT BLANKING METAL MATERIALS WITH HIGH THICKNESS (S>6 MM).
- Carmen Motfolea,Vasile Braha
- 53
- ASPECTS OF INNOVATIVE STRATEGY
- 1. MORARU Gina-Maria, 2. COJOCARU Monica
- 52
- THE ORGANIZATION OF THE FUTURE: THE CREATIVE ORGANIZATION
- 1. MORARU Gina-Maria, 2. COJOCARU Monica
- 44
- SOME ASPECTS CONCERNING THE PHYSICAL MODELS OBTAINING USING HIGH PERFORMANCE COMPOSITE MATERIAL
- Dumitru Nedelcu, Thomas Stöhr, Ciprian Ciofu & Daniel Mindru
- 42
- The microhardness variation of the welding bead in case of the electron beam welding
- Munteanu Adriana, Achitei Dragos
- 41
- MATERIAL QUALITY INFLUENCE ON „PETROTUB” CASING JOINTS FUNCTIONING
- Şt. GRIGORAŞ, Cr. ŞTIRBU and L.HANGANU
- 40
- COMPARATIVE ASPECTS CONCERNING DIFFERENT COLD PLASTIC SUPERFICIAL DEFORMATION PROCESSES
- Poschin Iolanda ,Nagit Gheorghe , Boca Mihai , Popa Sorin
- 39
- METHOD TO DETERMINE THE THEORETIC BURN
- Tudor CHERECHEŞ, Tiberiu HOMUTESCU
- 38
- PARAMETERS PROCESSING BY ELECTRICAL DISCHARGE MACHINING
- Dumitru Uliuliuc & Alexandru Radeanu
- 37
- THE UNDERSTANDING AND OPTIMIZATION OF THE SINGLE CAVITY MOULD FILLING PHASE IN PLASTIC INJECTION MOLDING, USING FEA
- Neculai Ivascu, Catalin Fetecau, Ion Postolache
- 36
- Modifications in the superficial layer at the electro-sparks processing
- Alexandru Radeanu, Dumitru Uliuliuc, Rodica Purcariu
- 35
- HOLISTIC APPROACH ON INTEGRATED, COLLABORATIVE PRODUCT DESIGN
- Banciu Felicia, George Draghici and Cristian Gheorge Turc
- 34
- THE DEVELOPMENT OF COURSE CONTENTS USED IN ENGINEERING DISTANCE EDUCATION
- C.C. Rusu, L.R. Mistodie
- 33
- EDUCATIONAL METHODOLOGIES IN ENGINEERING DISTANCE EDUCATION
- C.C. Rusu, L.R., Mistodie
- 32
- FRICTION STIR WELDING OF AL 6082 ALLOY
- Radu Cojocaru, Dorin Dehelean, Ramona Gabor, Cristian Ciucă, Uros Zupanc
- 31
- OPTIMIZING THE STRUCTURE OF A SHIP TRANSVERSE SECTION
- Dumitru Dragomir, Leonard Domnisoru, Alexandru Ioan
- 30
- THE CAD/FEM MODELLING FOR RIVER-COSTAL SHIP STRUCTURES.
- Leonard Domnisoru, Dumitru Dragomir, Alexandru Ioan
- 29
- THE STUDY OF SLOSHING IN THE PARALLELEPIPED CONTAINERS
- Alexandru Ioan, Leonard Domnisoru, Dumitru Dragomir
- 27
- THE CHOICE OF MATERIALS STAGE AS PART OF THE ECODESIGN PROCESS
- Barsan, L., Barsan, A., Bolos, C.
- 26
- INVESTIGATION OF THE EFFECTS OF PLASMA ARC CUTTING PARAMETERS ON THE ROUGHNESS VARIATION OF SOME MILD STEEL PLATES
- ILII Sanda-Maria, ACHIŢEI Dragoş, MUNTEANU Adriana
- 20
- Device for superficial plastic deformation by mechanical shocks
- Raluca TANASA, Traian GRAMESCU
- 15
- THE CONSTRUCTIVE ANALYSIS OF THE BORER HEADS FOR THE ROTATIVE BORING
- Dumitrescu Iosif, Cozma Bogdan
- 14
- STAND FOR THE ROTATIVE BORING OF SOFT ROCKS
- Cozma Bogdan, Dumitrescu Iosif
- 13
- PROBLEM BASED LEARNING-CASE STUDY FOR AUTOMOTIVE ENGINEERING
- V.Sandu,C.Ambrus
- 11
- INNOVATIVE MATERIALS SELECTION FOR COMPETITIVE ADVANTAGES
- Eugen Axinte; Sorin Popa ;Gheorghe NagitJuan Manuel Sala Gil & Lorica Axinte
- 10
- Base Elements Concerning the Organization of the Stock Management within Logistic Systems, Using Multi-Agent Systems
- Camelia Lixandru, Traian Grămescu, Roberto Teti
- 9
- Researches regarding the influence of the force on the quality parameters of processed surfaces through cold plastic deformation
- Octavian Pruteanu, Constantin Carausu, Ionel Sarbu, Traian Gramescu, Mariana Pruteanu & Corneliu Pricope
- 8
- Influence of material tool type inserts on cutting force in turning of polymeric materials
- Ana Munteanu, Catalin Fetecau, Felicia Stan
- 7
- Researches regarding the influence of the piece speed rotation on the quality parameters of processed surfaces through cold plastic deformation
- Octavian Pruteanu, Constantin Carausu,Ionel Sarbu, Radu Coman & Valerica Husanu
- 6
- THEORETICAL AND EXPERIMENTAL STUDY OF TORQUE DAMPING IN NON LINEAR ELASTICITY COUPLINGS
- V.Sandu,C.Bejan
- 3
- ASPECTS OF INJECTION MOLDING SIMULATION OF COMPLEX PARTS
- Ion Postolache, Catalin Fetecau Fabrizio Quadrini, Erica Anna Squeo & Cosmin Morarescu

Full papers waiting:

- id
- title
- authors
- 334
- The Principles of Configuring Arc Welding Robotized Systems
- Nicolae, Joni ; Andreea, Dobra
- 333
- Industrial application possibilities for the MSG-LaserHybrid Welding Process
- Nicolae, Joni Paul, Christian
- 324
- The influence of physical-mechanical properties of sintered materials in the carrying capacity of thrust bearings
- Ilie MANOLI, Sergiu DÎNTU
- 318
- THE ANALYSIS OF THE BARE AND GEAR WINDSHIELD WIPERS MECHANISMS
- Adrian-Constantin BUTA, Petre ALEXANDRU
- 317
- THE ANALYSIS OF THE BARE AND GEAR WINDSHIELD WIPERS MECHANISMS
- Adrian-Constantin BUTA, Petre ALEXANDRU
- 316
- ASPECTS REGARDING ELEARNING SYSTEM IN FOOD AND TOURISM AREA
- Gaceu Liviu
- 313
- INDICATORS USED TO MEASURE THE QUALITY OF PRODUCTS
- MÂNDRU LIDIA, HÂRLAB ALINA, CAMARDA ADINA LIANA
- 288
- THEORETICAL ASPECTS REGARDIND PLANE QUADRILATERAL MECHANISMS OBTAINED THROUGH OPTIMUM SYNTHESIS
- Mircea Lazăr
- 277
- Quality suspension study with statistical functions
- Constantin Florin
- 276
- Research on the grains crushing strength
- Lupu Mirabela, Padureanu Vasile
- 265
- Developing value added industry
- Bugaian Larisa
- 259
- OEE – a key of stabilizes the production
- Ana Rotaru
- 258
- CONWIP – alternative to Kanban
- Ana Rotaru
- 257
- ASPECTS CONCERNING THE DEVIATION OF LIQUID DROPS IN
- Florean Rus
- 241
- Galvanic-diffusion coverings on nickel-plated steel and iron pieces
- Goian Vladimir, Ciofu Iurie, Ciofu Andrei
- 240
- Contributions pertaining to the influence of technological systems' rigidity onto the processing accuracy
- Radu Stefan Craciunoiu, Aurelian Vlase, Stefan Craciunoiu
- 238
- RESEARCHES CONCERNING THE TEMPERATURE AND ULTRASONIC ENERGY EFFECT IN AGING PROCESS OF THE DISTILLATE ALCOHOLIC BEVERAGES
- Mihaela Danciu (Purcaru)
- 237
- RESEARCHES REGARDING THE DEVELOPMENT OF SOME COST MODELS AND QUALITY MODELS IN THE PROJECT MANAGEMENT
- Ana-Maria CROITORU1 , Valeriu AVRAMESCU2, Stefan Craciunoiu3
- 234
- NEW ASPECTS CONCERNING POSSIBILITIES FOR MONITORING OF DRILLING
- Maria Luminita Scutaru , Horatiu Teodorescu-Draghicescu & George Calin Seritan
- 233
- CONTRIBUTINONS ON THE WOODEN MATERIALS THERMO INSULATOR PANELS USED IN HOUSING CONSTRUCTION
- Maria Luminita Scutaru , Horatiu Teodorescu-Draghicescu & Anghel Chiru
- 232
- SOME NEW CONSTRUCTIVE SOLUTIONS FOR VERTICAL LATHE CENTRE PRODUCED BY FEELER WITH FANUC NUMERICAL COMMAND
- Doru Bardac, Gabriel Vescan & Florin Bardes
- 231
- SOME TECHNICAL-ECONOMICAL ASPECTS REGARDING THE MANUFACTURING ON THE FEELER LATHE WITH FANUC CNC
- Doru Bardac, Gabriel Vescan & Florin Bardes
- 219
- Rapid prototyping in iterative design, using CATIA V5 and ZPrinter 310 Plus
- Daniel - Constantin Anghel, Nadia Belu & Ilarion Banu
- 208
- SYSTEM OF SHAFT CALCULATION AND 3D MODELING
- Gorobets I., Chubuchnyi O., Gorobets O.
- 207
- DECREASE OF CUTTING FORSE
- Gorobets I., Mikhaylov A., Golubov M., Navka I.
- 203
- THE FRONTAL AND REAR PLOUGHS EFFECTS ON 4WD TRACTORS
- Carol Csatlos
- 197
- Global approach, in order to find the optimum parameters for the forming processes of the aluminium sheet alloys
- Gavril Grebenisan
- 193
- Optimization of the process modeling for improving superplastic deformation by gasostatic forming in alluminium alloys
- Gavril Grebenisan
- 183
- REDRESS WILL BE SLOW, DIFFICULT AND UNPREDICTABLE
- Victor Madan
- 178
- Metahetaeristically optimization of the materials flow in workshop
- LUCIA VIOLETA MELNIC, CORNELIU NEAGU
- 174
- The Extending a CAD- CAM Integrated System for Environmental Ship Design
- Gabriel POPESCU, Camelia POPESCU
- 173
- NATURAL STRUCTURAL SYSTEMS FOR ECOLOGICAL DESIGN
- Valeriu Podborschi
- 172
- The importance of the role of implementation of ISO tolerance systems in automotive industry
- Raveica Ionel Crinel, Herghelegiu Eugen
- 154
- OPTIMIZING THE INTERNAL CONVEING SYSTEMS IN CEREAL MILLS
- NAZARU ANA MARIA, BICA CRISTINA MARIA
- 148
- Fatigue Assessment: damage accumulation method or fracture mechanics approach?
- Ass.Prof.Dr.Eng. Edward PETZEK and Prof.Dr.Eng. Radu BANCILA
- 141
- CONSIDERATIONS ON MEASURING CAMBER GEARS
- Chirugu Marius, Paraschiv Dragos, Ciotau Valentin,Tsiafis Ianis
- 140
- INFORMATION & COMMUNICATION TEHNOLOGIES (ITC) MARKET IN MICROFINANCE SECTOR
- Savescu R., Zosim C.
- 132
- The computation of the diffusion coefficient of phosphor and arsenic in the gallium melt
- Iurie CIOFU, Ion PARTAC, Andrei CIOFU
- 129
- Reading the possibilities to decode the elasticity constants at microscopic level from macroexperience
- Marina Vasile
- 126
- The analysis of behavior of polycrystalline materials with several phases
- Ph.D. Marina Viorica
- 106
- Folding solar panel (Panou solar pliant)
- Malcoci Iulian, Rusu Eugen
- 98
- Investigations on Hardening Piece Surfaces by Applying Electrical Discharges in Impulse
- Pavel Topala, Besliu Vitalie
- 97
- Research of Influence of Electrospark Processing on Phase Structure of Molybdenum Coverings on Steel 20
- Pavel Pereteatcu, Dina Gertsriken, Vladimir Mazanko, Valentin Mikhailov, Alexandr Ojegov
- 96
- Constructive and Material Peculiarities Used at Elaborating Electrode-Tools for the Processing of Surfaces by Applying Electrical Discharges in Impulse
- Pavel Topala, Pinzaru Natalia
- 95
- Experimental Investigations on Microoxidation of Surfaces by Means of Applying Electrical Discharges in Impulse under Ordinary Conditions
- Pavel Topala, Petru Stoicev, Alexandr Ojegov
- 94
- New Technological Applications of Electrical Discharges in Impulse
- Pavel Topala
- 58
- TECHNOLOGY FEATURES OF ASSEMBLING OF RUBBER-METAL CONNECTIONS BY SELF-CUTTING SCREWS
- Vodolazskaya N.
- 56
- CONTINUOUSLY IMPROVEMENT THE MAIN OBJECTIVE OF TOTAL PRODUCTIVE MAINTENANCE SYSTEM FOR LEAN ORGANIZATION
- Daniel Georgescu&Constantin Militaru
- 55
- KAIZEN vs. INNOVATION IN MANUFACTURING ORGANIZATIONS
- Daniel Georgescu&Constantin Militaru
- 28
- SOME ASPECTS CONCERNING THE DESIGN FOR RECYCLING AND WASTE REDUCING
- Barsan, L., Barsan, A.